Sharp SD-AS10 SD-AS10 Operation Manual - Page 52
Operations after setting the timer
UPC - 074000413757
View all Sharp SD-AS10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
SD-AS10 Operations after setting the timer 1 After setting the timer " Checking the timer setting 1 Press the TIMER/SLEEP/CLOCK button. 2 Within 10 seconds, press the or button to select "ONCE TIMER" or "DAILY TIMER", and press the ENTER button. 3 Within 10 seconds, press the or button to select "ONCE CALL" or "DAILY CALL", and press the ENTER button. The unit returns to the timer stand-by mode after displaying the settings in order. Advanced Features - Operations after setting the timer - Lights up ! The unit is in the timer stand-by mode. ! If the timer set indicator does not light up, turn on the power and set the timer again. 2 At the start time " Canceling the timer setting 1 Press the TIMER/SLEEP/CLOCK button. 2 Within 10 seconds, press the or button to select "ONCE TIMER" or "DAILY TIMER", and press the ENTER button. 3 Within 10 seconds, press the or button to select "ONCE OFF" or "DAILY OFF", and press the ENTER button. Timer will be canceled (the setting will be retained). " Changing the timer setting Perform steps 1 - 10 on page 51 to set the timer again. Flashes The volume will increase gradually until it reaches the preset volume. 3 When the finish time is reached The unit is set to the power stand-by mode automatically. " To use the same timer setting Once timer: 1 Turn on the unit, and press the TIMER/SLEEP/CLOCK button. 2 Within 10 seconds, press the or button to select "ONCE TIMER", and press the ENTER button. 3 Within 10 seconds, press the or button to select "ONCE ON", and press the ENTER button. 4 Press the POWER button to enter the power stand-by mode. Daily timer: The timer will operate at the same time every day. It will continue until the daily timer setting is canceled. Cancel the daily timer when it is not in use. When you use the same setting for the daily timer, select "DAILY TIMER" instead of "ONCE TIMER", and select "DAILY ON" instead of "ONCE ON". 52