Sharp SD-AS10 SD-AS10 Operation Manual - Page 51
Available playback sources: DVD/CD, TUNER, DIGITAL 1, DIGITAL 2, TV
UPC - 074000413757
View all Sharp SD-AS10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
SD-AS10 Advanced Features - Setting the timer - 1 Turn on the unit, and press the TIMER/SLEEP/CLOCK button. 2 Within 10 seconds, press the or button to select "ONCE TIM- ER" or "DAILY TIMER", and press the ENTER button. Once timer Daily timer 3 Within 10 seconds, press the or button to select "ONCE SET" or "DAILY SET", and press the ENTER button. Once timer Daily timer 4 Press the or button to adjust the hour and then press the ENTER button. 5 Press the or button to adjust the minutes and then press the ENTER button. 6 Set the time to finish as in steps 4 and 5 above. 7 Switch the input with the or button, and then press the ENTER button. ! Available playback sources: DVD/CD, TUNER, DIGITAL 1, DIGITAL 2, TV and VCR. ! If you select DIGITAL 1, DIGITAL 2, TV or VCR, connect the unit to the corresponding equipment and set the timer. ! When you select "TUNER", select a station by pressing the or button, and then press the ENTER button. ! If a station has not been programmed, "NO P.SET" will be displayed and timer setting will be canceled. Preset channel number 8 Adjust the volume with the or button and press the ENTER button. Do not set the volume too high. 9 The following appear and the setting for each item is displayed. Once timer Daily timer 10Press the POWER button to enter the power stand-by mode. ! The unit enters the timer stand-by mode. (The timer set indicator lights up. See page 52.) ! The timer setting is retained. 51