Sharp VL-NZ100U VLNZ100U|VLNZ150U Operation Manual - Page 53

Useful Features Playback Using the Remote Control Available modes: TAPE-CAMERA, TAPE-VCR Use the remote control to operate the camcorder from a distance, such as when you want to record yourself in a scene, or when the camcorder is connected to a TV for use as a VCR. Installing the Batteries 1 Open the battery compartment cover. 2 Insert the two supplied AA (R6 or UM/ SUM-3) batteries with the battery poles positioned as indicated. 1 2 4 Press l or m to select "ON", then press the SET button. REMOT E ON 5 Press the MENU button to turn off the menu screen. Operating Aim the remote control at the remote sensor of the camcorder, and press the control buttons to operate. Remote sensor 16 ft (5 m) Approximate operating range of remote control 3 Place the cover. Useful Features REW button REC START/STOP button Activating 1 In TAPE-VCR (or CARD-VCR) mode, press the MENU button until the menu screen appears. 2 Press l or m on the operation button to select I, then press the SET button. 3 Press l or m to select "REMOTE", then press the SET button. OTHERS R EMO T E BEEP T I ME CODE T C OU T RET URN ON OFF ZOOM buttons (W/T) FF button SLOW button PLAY button STOP button VOLUME +/L buttons PAUSE/STILL button Notes: • Do not use old and new batteries together or batteries of different brands together. • Be careful not to expose the remote sensor to direct sunlight or strong interior lighting, as this may prevent the remote control from operating properly. • Be sure that there are no obstacles between the remote control and the remote sensor. 38