Sharp VL-NZ100U VLNZ100U|VLNZ150U Operation Manual - Page 70

DDigiigtaliStatilllCSamteirlalFCeaaturmes era Features CCaarmd ReeracoRrdeincgording Card Recording Available mode: CARD-CAMERA You can take a still picture in the same way as you do with a standard camera and record that image on the card. STILL button Power Zoom control 5 Adjust the Power Zoom control to frame the subject as you desire. 6 Press the STILL button half-way down to focus on the subject. • The camcorder automatically focuses on the subject. When it is set, you will hear a sound and see T mark, then the camcorder locks the focus. CARD 9 / 81 NORMAL 7 Press the STILL button fully to begin recording. Media Selection switch Power switch 1 Insert a card into the camcorder (see page 13). 2 Remove the lens cap. 3 Set the Media Selection switch to CARD. 4 Hold down the Lock button and set the Power switch to CAMERA. • The picture from the lens now displays. Number of shots taken/remaining CARD 9 / 81 NORMAL Lock button AU TO CARD 9 / 81 NORMAL AU T O • The S indicator flashes red while data is being recorded on the card, and returns to white when recording completes. • To record another image, release the STILL button and make sure the picture is not frozen in the monitor, then perform steps 6 and 7. Notes: • Recording under insufficient lighting may result in blurred images. It is recommended that you use a tripod to record insufficiently illuminated subjects. • Recording under the light of a fluorescent, mercury, or sodium lamp may cause flickering in the image and, depending on the timing of the shot, may result in changes to color hue in the image. • Set the BEEP menu item to "OFF" to turn off the focus locking sound. Caution: • Do not turn the power off while the S indicator is flashing in step 7. Digital Still Camera Features 55