Sharp VL-NZ100U VLNZ100U|VLNZ150U Operation Manual - Page 64
Recording from an, External Source
View all Sharp VL-NZ100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Advanced Features Playback Recording from an External Source Available mode: TAPE-VCR You can use this camcorder to record or edit videos from another source, such as a VCR, TV, or video disc player. Connect the camcorder to the source equipment with the supplied audio/video cable, as shown. Recording To AV jack Audio/video cable (supplied) To Record from an External Source 1 Set the camcorder to TAPE-VCR mode, and insert a Mini DV cassette. 2 Begin playback on the video equipment connected to the camcorder. • Check the camcorder screen to see if the picture is properly received. 3 Press the REC START/STOP button on the camcorder. • The camcorder enters Recording Standby mode. 4 Press m on the Operation button to begin recording. Notes: • To pause recording, press m. Press m again to resume recording. • To operate by remote control, perform steps 1 and 2 above, and press the REC START/STOP button, then press the PAUSE/STILL button (g). • If "NO SIGNAL" is displayed on the camcorder screen, check that the audio/video cable is properly connected. Playback Yellow: To video output jack White: To audio output (L) jack Red: To audio output (R) jack TV with monitor output VCR : The arrow shows the signal flow. Notes: • See page 2 for how to open the jack cover. • If the source equipment has only one audio output jack, use the white plug for the audio connection on the source equipment. (The input audio will only be recorded on the left channel of the tape.) To stop recording Press l on the Operation button. Cutting Unwanted Sequences 1 Press m to pause recording when the source tape reaches the beginning of the sequence to be cut. 2 Press m to resume recording when the source tape reaches the end of the sequence to be cut. Advanced Features 49