Sony BDV-N5200W Operating Instructions - Page 27

Getting Started 2 Press "/1 to turn on the system. "/1 3 Connect the AC power cord (mains lead) of the surround amplifier. LINK/STANDBY indicator When wireless transmission is activated, the LINK/STANDBY indicator turns green. If the LINK/STANDBY indicator does not turn on, see "Wireless sound" (page 68). About the LINK/STANDBY indicator The LINK/STANDBY indicator shows wireless transmission status as follows. Turns green The system is turned on, wireless transmission is activated and surround signals are being received. Turns orange The system is turned on, wireless transmission is activated with the Secure Link function, and surround signals are being received. Flashes green or orange slowly Wireless transmission is deactivated. Turns red The surround amplifier is in standby mode while the system is in standby mode or wireless transmission is deactivated. Turns off The surround amplifier is turned off. Flashes red The surround amplifier's protection is active. About the standby mode The surround amplifier enters standby mode automatically when the main unit is in standby mode or wireless transmission is deactivated. The surround amplifier turns on automatically when the main unit is turned on and wireless transmission is activated. To specify the wireless connection If you use multiple wireless products or your neighbors use wireless products, interference may occur. To prevent this, you can specify the wireless connection to link the main unit to the surround amplifier (Secure Link function). For details, see "Further Settings for the Wireless System" (page 51). Step 5: Performing the Easy Setup Follow the Steps below to make the basic adjustments and network settings for the system. Displayed items vary depending on the area. 1 Insert two R03 (AAA) batteries (supplied) by matching the 3 and # ends on the batteries to the markings inside the compartment. 2 Turn on the TV. 27US