Sony BDV-N5200W Operating Instructions - Page 69
Tuner, Playback, USB device - multi region
View all Sony BDV-N5200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Additional Information Tuner Radio stations cannot be tuned in. t Check that the antenna (aerial) is connected securely. Adjust the antenna (aerial) or connect an external antenna (aerial) if necessary. t The signal strength of the stations is too weak (when tuning in with automatic tuning). Use manual tuning. Playback The disc does not play. t The region code on the BD/DVD does not match the system. t Moisture has condensed inside the main unit and may cause damage to the lenses. Remove the disc and leave the main unit turned on for about half an hour. t The system cannot play a recorded disc that is not correctly finalized (page 71). File names are not displayed correctly. t The system can only display ISO 8859-1 compliant character formats. Other character formats may be displayed differently. t Depending on the writing software used, the input characters may be displayed differently. A disc does not start playing from the beginning. t Resume play has been selected. Press OPTIONS and select [Play from beginning], then press . Playback does not start from the resume point where you last stopped playing. t The resume point may be cleared from memory depending on the disc when • you open the disc lid. • you disconnect the USB device. • you play other content. • you turn off the main unit. The language for the soundtrack/ subtitle or angles cannot be changed. t Try using the BD's or DVD's menu. t Multilingual tracks/subtitles or multi-angles are not recorded on the BD or DVD being played. Bonus contents or other data that are contained in a BD-ROM cannot be played. t Try the following: 1 Remove the disc. 2 Turn the system off. 3 Remove and reconnect the USB device (page 33). 4 Turn the system on. 5 Insert the BD-ROM with BONUSVIEW/BD-LIVE. USB device The USB device is not recognized. t Try the following: 1 Turn the system off. 2 Remove and reconnect the USB device. 3 Turn the system on. t Make sure that the USB device is securely connected to the (USB) port. t Check if the USB device or a cable is damaged. t Check if the USB device is on. t If the USB device is connected via a USB hub, disconnect it and connect the USB device directly to the main unit. 69US