Sony BDV-N5200W Operating Instructions - Page 46
Calibrating the Appropriate Speaker Settings Automatically, Auto Calibration], BDV-N9200W/BDV-N7200W - test
View all Sony BDV-N5200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Calibrating the Appropriate Speaker Settings Automatically [Auto Calibration] (BDV-N9200W/BDV-N7200W only) D.C.A.C. DX (Digital Cinema Auto Calibration DX) brings you the ideal sound experience by automatically adjusting the setting of the speakers' distance, location, and acoustic. Note • The system outputs a loud test sound when [Auto Calibration] starts. You cannot turn the volume down. Give consideration to children and neighbors. • Before [Auto Calibration], make sure that - all the speakers are connected to the main unit and surround amplifier. - the surround amplifier is turned on and you have installed the surround amplifier in an appropriate location to ensure wireless connection with it. 1 Press HOME. The home menu appears on the TV screen. 2 Press B/b to select [Setup]. 3 Press V/v to select [Audio Settings], then press . 4 Press V/v to select [Auto Calibration], then press . The [Select speaker layout.] display appears. 5 Press V/v to select setting according to your speakers placement, then press . • [Standard]: The surround speakers are installed in the rear position. • [All Front]: All speakers are installed in the front position. The confirmation display for [Auto Calibration] appears. 6 Connect the calibration mic to the A.CAL MIC jack on the rear panel. Set up the calibration mic at ear level using a tripod, etc. (not supplied). The calibration mic should aim the TV screen. The front of each speaker should face the calibration mic, and there should be no obstruction between the speakers and the calibration mic. 7 Press V/v to select [OK]. To cancel, select [Cancel]. 8 Press . [Auto Calibration] starts. The system adjusts the speaker settings automatically. Be quiet during the measurement. Note While [Auto Calibration] is in progress, do not operate the system. 9 Confirm the result of [Auto Calibration]. The distance and level for each speaker appear on the TV screen. Note • If measurement fails, follow the message then retry [Auto Calibration]. • If no center speaker is detected, the [Center Speaker] will be automatically set to [Off]. 46US