Sony BDV-N5200W Operating Instructions - Page 47

Other Operations 10 Press V/v to select [OK] or [Cancel], then press . x The measurement is OK. Disconnect the calibration mic, then select [OK]. The result is implemented. x The measurement is not OK. Follow the message, then select [OK] to retry. Tip You can change the unit of measurement (feet or meters) by pressing the color button (RED). Setting the Speakers [Speaker Settings] To obtain optimum surround sound, set the speakers' distance from your listening position. 1 Press HOME. The home menu appears on the TV screen. 2 Press B/b to select [Setup]. 3 Press V/v to select [Audio Settings], then press . 4 Press V/v to select [Speaker Settings], then press . The [Select speaker layout.] display appears. 5 Press V/v to select setting according to your speakers placement, then press . • [Standard]: The surround speakers are installed in the rear position. • [All Front]: All speakers are installed in the front position. Note All settings are reset to default settings each time you change the speaker layout setting. 6 Press B/b to select [OK] or [Cancel], then press . 7 Press V/v to select the item, then press . 8 Press V/v to adjust the parameter. 9 Press B/b and to confirm the settings. Check the following settings. x [Center Speaker] [On]: The center speaker is connected. [Off]: The center speaker is not connected. x [Distance] When you move the speakers, be sure to set the parameters of the distance from the listening position to the speakers. You can set the parameters from 0 to 23 feet (0.0 to 7.0 meters). [Front Left/Right] 10 ft/3.0 m: Set the front speaker distance. [Center] 10 ft/3.0 m: Set the center speaker distance. This setting is only available when [Center Speaker] is set to [On]. [Surround Left/Right] 10 ft/3.0 m: Set the surround speaker distance. [Subwoofer] 10 ft/3.0 m: Set the subwoofer distance. Tip You can change the unit of measurement (feet or meters) by pressing the color button (RED). 47US