Sony BDV-N5200W Operating Instructions - Page 48
Using the Sleep Timer
View all Sony BDV-N5200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
x [Level] You can adjust the sound level of the speakers. You can set the parameters from -6.0 dB to +6.0 dB. Be sure to set [Test Tone] to [On] for easy adjustment. [Front Left/Right] 0.0 dB: Set the front speaker level. [Center] 0.0 dB: Set the center speaker level. This setting is only available when [Center Speaker] is set to [On]. [Surround Left/Right] 0.0 dB: Set the surround speaker level. [Subwoofer] 0.0 dB: Set the subwoofer level. x [Relocation] (BDV-N9200W/ BDV-N7200W only) You can correct the speaker position virtually to improve the surround effect. [On]: You can hear sound from a virtually relocated speaker position determined by [Auto Calibration]. [Off]: You can hear sound from the actual speaker position. Note • This setting is only reflected after performing [Auto Calibration]. • You cannot select this function when the speaker layout is set to [All Front]. x [Test Tone] The speakers will emit a test tone to adjust [Level]. [Off]: The test tone is not emitted from the speakers. [On]: The test tone is emitted from each speaker in sequence while adjusting level. When you select one of the [Speaker Settings] items, the test tone is emitted from each speaker in sequence. Adjust the sound level as follows. 1 Set [Test Tone] to [On]. 2 Press V/v to select [Level], then press . 3 Press V/v to select the speaker type you want, then press . 4 Press B/b to select the left or right speaker, then press V/v to adjust the level. 5 Press . 6 Repeat Steps 3 to 5. 7 Press RETURN. The system returns to the previous display. 8 Press V/v to select [Test Tone], then press . 9 Press V/v to select [Off], then press . Note • The test tone signals are not output from the HDMI (OUT) jack. • The test tone is not emitted from the center speaker if [Center Speaker] is set to [Off]. Tip To adjust the volume of all the speakers at the same time, press VOL +/-. Using the Sleep Timer You can set the system to turn off at a preset time, so you can fall asleep listening to music. Press SLEEP. Each time you press SLEEP, the minutes display (the remaining time) in the top panel display changes by 10 minutes. When you set the sleep timer, the remaining time appears every 5 minutes. When the remaining time is less than 2 minutes, "SLEEP" flashes in the top panel display. 48US