Sony BDV-N5200W Operating Instructions - Page 67
Sound
View all Sony BDV-N5200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Additional Information The dark area of the picture is too dark/ the bright area is too bright or unnatural. t Set [Picture Quality Mode] to [Auto] (default) (page 41). Picture noise appears. t Clean the disc. t If the picture output from your system goes through your equipment to get to your TV, the copy-protection signal applied to some BD/DVD programs could affect picture quality. If you still experience problems even when you connect your main unit directly to your TV, try connecting your main unit to the other input jacks. An image is not displayed on the entire TV screen. t Check the setting of [TV Type] in [Screen Settings] (page 54). t The aspect ratio on the disc is fixed. Color irregularity occurs on the TV screen. t If the speakers are used with a CRT- based TV or projector, install the speakers at least 0.3 meters (1 foot) from the TV set. t If the color irregularity persists, turn off the TV set once, then turn it on after 15 to 30 minutes. t Make sure that no magnetic object (magnetic latch on a TV stand, health care device, toy, etc.) is placed near the speakers. Sound There is no sound. t The speaker cords are not connected securely. t Check the speaker settings (page 47). The Super Audio CD sound of an equipment that is connected to the HDMI (IN 1) or HDMI (IN 2) jack is not output. t HDMI (IN 1) and HDMI (IN 2) does not accept an audio format that contains copy protection. Connect the analog audio output of the equipment to the AUDIO IN (L/R) jacks of the main unit. There is no sound from the TV via the HDMI (OUT) jack when using the Audio Return Channel function. t Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On] (page 59). Also, set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Auto] (page 59). t Make sure that your TV is compatible with the Audio Return Channel function. t Make sure that an HDMI cable is connected to a jack on your TV that is compatible with the Audio Return Channel function. The system does not output sound of TV programs correctly when connected to a set-top box. t Set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Off] (page 59). t Check the connections (page 23). Severe hum or noise is heard. t Move your audio equipment away from the TV. t Clean the disc. The sound loses stereo effect when you play a CD. t Select stereo sound by pressing AUDIO (page 43). 67US