Sony BDV-N5200W Operating Instructions - Page 44
Tuner, Listening to the Radio, Presetting radio stations
View all Sony BDV-N5200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Tuner Listening to the Radio 1 Press FUNCTION repeatedly until "FM" appears in the top panel display. 2 Select the radio station. Automatic tuning Hold down TUNING +/- until the auto scanning starts. [Auto Tuning] appears on the TV screen. Scanning stops when the system tunes in a station. To cancel automatic tuning, press any buttons. Manual tuning Press TUNING +/- repeatedly. 3 Press VOL +/- repeatedly to adjust the volume. If an FM program is noisy If an FM program is noisy, you can select monaural reception. There will be no stereo effect, but reception will improve. 1 Press OPTIONS. The option menu appears on the TV screen. 2 Press V/v to select [FM Mode], then press . 3 Press V/v to select [Monaural], then press . • [Stereo]: Stereo reception. • [Monaural]: Monaural reception. Tip You can set [FM Mode] for each preset station separately. Presetting radio stations You can preset up to 20 stations. Before tuning, make sure to turn down the volume to minimum. 1 Press FUNCTION repeatedly until "FM" appears in the top panel display. 2 Hold down TUNING +/- until the auto scanning starts. Scanning stops when the system tunes in a station. 3 Press OPTIONS. The option menu appears on the TV screen. 4 Press V/v to select [Preset Memory], then press . 5 Press V/v to select the preset number you want, then press . 6 Repeat Steps 2 to 5 to store other stations. To change a preset number Select the preset number you want by pressing PRESET +/-, then perform the procedure from Step 3. To select a preset station 1 Press FUNCTION repeatedly until "FM" appears in the top panel display. The last received station is tuned in. 2 Press PRESET +/- repeatedly to select the preset station. Tip Each time you press DISPLAY, the display in the top panel display changes cyclically as follows: Frequency t Preset number t Decoding status* * Appears when [Sound Effect] is set to [Dolby Pro Logic], [DTS Neo:6 Cinema], or [DTS Neo:6 Music] (page 57). 44US