Sony DAV-LF1H Operating Instructions - Page 17
For the surround speaker L, speaker adapter, and secure it with the screws. for all speakers
View all Sony DAV-LF1H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Getting Started - BASIC - 2 Remove the post cover, slide the speaker adaptor onto the post, adjust the height of the speaker adapter, and secure it with the screws. (for all speakers) Post cover Hook (upper part) Screws Loosen (but do not remove) the screws before attaching. Speaker adaptor Screws , , Post About the height of the speaker The height of the speaker top is A + 390 mm (15 3/8 inches). (A: Between the top of the speaker adaptor and top of the base.) • Lowest position: A = 570 mm (22 1/2 inches), Speaker top = 960 mm (37 7/8 inches) • Highest position: A = 910 mm (35 7/8 inches), Speaker top = 1,300 mm (51 1/4 inches) Note • Keep the post cover handy, so you can replace it later. 3 (For the surround speaker (L)) Connect the connector of the speaker cord to the speaker. Connector (gray) Speaker cord Rear of the surround speaker (L) continued 17US