Sony DAV-LF1H Operating Instructions - Page 35
Installing the IR receiver on a wall
View all Sony DAV-LF1H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Installing the IR receiver on a wall 1 Install a commercially available screw in the wall so that it protrudes 4 mm (3/16 inches). 5 - 7 mm (7/32 - 9/32 inches) 4 mm (3/16 inches) 2 Detach the IR receiver stand and hang it via hole on the rear side of the IR receiver on the screw. Make sure that the IR receiver does not move after installation. IR receiver IR receiver stand Tip • When reattaching the IR receiver stand to the IR receiver, attach the stand so that both delta marks on the IR receiver and stand are aligned (page 33). Getting Started - ADVANCED - 35US
Getting Started – ADVANCED –
35
US
Installing the IR receiver on a
wall
1
Install a commercially available screw in the
wall so that it protrudes 4 mm (
3
/
16
inches).
2
Detach the IR receiver stand and hang it via
hole on the rear side of the IR receiver on
the screw.
Make sure that the IR receiver does not move
after installation.
Tip
• When reattaching the IR receiver stand to the IR
receiver, attach the stand so that both delta marks on
the IR receiver and stand are aligned (page 33).
4 mm (
3
/
16
inches)
5 – 7 mm
(
7
/
32
–
9
/
32
inches)
IR receiver
IR receiver stand