Sony DAV-LF1H Operating Instructions - Page 30
Step 5: Performing the Quick Setup, Switch the input selector on your TV so - hdmi
View all Sony DAV-LF1H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Getting Started - BASIC - Step 5: Performing the Quick Setup Follow the steps below to make the minimum number of basic adjustments for using the system. When using the remote, point it at the remote sensor on the control unit. "/1 C/X/x/c, DISPLAY AC adaptor POWER 1 Turn on the TV. 2 Press [/1 on the remote and POWER on the AC adaptor. The system and AC adaptor turn on. Note • Make sure that the function is set to "DVD." 3 Switch the input selector on your TV so that the signal from the system appears on the TV screen. [Press [ENTER] to run QUICK SETUP.] appears at the bottom of the screen. If this message does not appear, display the Quick Setup and perform again (page 32). 4 Press without inserting a disc. The Setup Display for selecting the language used in the on-screen display appears. LANGUAGE SETUP OSD: MENU: AUDIO: SUBTITLE: ENGLISH ENGLISH FRENCH SPANISH PORTUGUESE 5 Press X/x to select a language. The system displays the menu and subtitles in the selected language. 6 Press . The Setup Display for selecting the aspect ratio of the TV to be connected appears. SCREEN SETUP TV TYPE: 16:9 HDMI RESOLUTION: 16:9 YCBCR/RGB (HDMI): 4:3 LETTER BOX SCREEN SAVER: 4:3 PAN SCAN BACKGROUND: JACKET PICTURE BLACK LEVEL: ON BLACK LEVEL (COMPONENT OUT): OFF 4:3 OUTPUT: FULL 7 Press X/x to select the setting that matches your TV type. x If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode [16:9] (page 92) x If you have a 4:3 standard TV [4:3 LETTER BOX] or [4:3 PAN SCAN] (page 92) 8 Press . The [AUTO CALIBRATION] display appears. AUTO CALIBRATION Connect calibration mic. Start measurement? YES NO 30US