Sony DAV-LF1H Operating Instructions - Page 96
Multi-disc Resume] Dvd Video, Video Cd Only, Audio Drc] Dvd Video Only, Audio Hdmi], Hdmi Out Jack.
View all Sony DAV-LF1H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
• If PCM, DTS, Dolby Digital sound, and MPEG audio tracks have the same number of channels, the system selects PCM, DTS, Dolby Digital sound, and MPEG audio tracks in this order. x [MULTI-DISC RESUME] (DVD VIDEO/ VIDEO CD only) Switches the Multi-disc Resume setting on or off. [ON] [OFF] Stores the resume settings in memory for up to 40 discs. Does not store the resume settings in memory. Playback restarts at the resume point only for the current disc in the system. x [AUDIO DRC] (DVD VIDEO only) Narrows the dynamic range of the sound track. Useful for watching movies at low volume late at night. [OFF] [STANDARD] [MAX] No compression of dynamic range. Reproduces the sound track with the kind of dynamic range that the recording engineer intended. Compresses dynamic range fully. x [AUDIO (HDMI)] Selects the type of audio signal output from the HDMI OUT jack. [OFF] [AUTO] [PCM] The sound is not output from the HDMI OUT jack. Outputs audio signals that is matched to the requested audio stream from the connected TV. Converts Dolby Digital, DTS (digital theater system), or 96 kHz/24 bit PCM (pulse code modulation) signals to 48 kHz/ 16 bit PCM (pulse code modulation). Note • A loud noise (or no sound) will be output if you connect the system to a TV that is not compatible with DOLBY DIGITAL/DTS (digital theater system) signals and [AUTO] is selected. In this case, select [PCM]. • When you connect the system and TV with the HDMI cord and [AUTO] or [PCM] is selected, AUDIO DRC, A/V SYNC, BASS/TREBLE, MOVIE/ MUSIC, and sound field are not applied to the sound that is output from the TV. 96US