Sony DCR-PC5 Operating Instructions - Page 12
Installing the battery pack, Note on NP-F10/FS11
View all Sony DCR-PC5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Step 1 Preparing the power supply Charging temperature The temperature range for charging is 32 ˚F to 104 ˚F (0 ˚C to 40 ˚C). However, to provide maximum battery efficiency, the recommended temperature range when charging is 50 ˚F to 86 ˚F (10 ˚C to 30 ˚C). If the power may go off although the battery remaining indicator indicates that the battery pack has enough power to operate Charge the battery pack fully again so that the indication on the battery remaining indicator is correct. After charging the battery pack Remove the battery pack from the AC adaptor. Note on NP-F10/FS11 The battery life will be shorter when you carry out recording in a cold place or with the LCD panel opened. We recommend that you use the NP-FS21/FS31 large capacity battery pack (not supplied). Plug the power cord deeply Be sure to plug the power cord deeply into the terminal of AC power adaptor so that it is firmly locked. If there is a gap between the plug of power cord and the terminal of AC power adaptor, it does not affect the efficiency of the AC power adaptor. What is "InfoLITHIUM"? The "InfoLITHIUM" is a lithium ion battery pack which can exchange data such as battery consumption with compatible electronic equipment. This unit is compatible with the "InfoLITHIUM" battery pack (S series). Your camcorder operates only with the "InfoLITHIUM" battery. "InfoLITHIUM" S series battery packs have the mark. "InfoLITHIUM" is a trademark of Sony Corporation. Installing the battery pack Install the battery pack to use your camcorder outdoors. (1) While sliding BATT RELEASE in the direction of the arrow 1, slide the battery terminal cover in the direction of the arrow 2. (2) Insert the battery pack in the direction of the arrow until it clicks. 1 2 2 1 12