Sony DCR-PC5 Operating Instructions - Page 59
Using the i.LINK cable DV connecting cable, When you have finished dubbing a tape, DV IN/OUT jack
View all Sony DCR-PC5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Dubbing a tape Using the i.LINK cable (DV connecting cable) Simply connect the i.LINK cable (DV connecting cable) (not supplied) to DV IN/OUT and to DV IN/OUT of the DV products. With digital-to-digital connection, video and audio signals are transmitted in digital form for high-quality editing. You cannot dub the titles, display indicators or the contents of cassette memory. (1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder. (2) Prepare the VCR for recording. Set the input selector to LINE. Refer to the operating instructions of the VCR. (3) Set the POWER switch to VCR. (4) Play back the recorded tape on your camcorder. (5) Start recording on the VCR. Editing DV IN/OUT (not supplied) DV S VIDEO LANC DV IN/OUT : Signal flow When you have finished dubbing a tape Press x on both your camcorder and the VCR. You can connect one VCR only using the i.LINK cable (DV connecting cable). The following functions do not work during digital editing: - Digital effect - PB zoom - Picture effect You can also use your camcorder as a recorder You can use your camcorder as a player or recorder without changing the connection. If you record playback pause picture with the DV IN/OUT jack The recorded picture becomes rough. And when you play back the picture using the other video equipment, the picture may jitter. 59