Sony DCR-PC5 Operating Instructions - Page 18
— Recording – Basics —, Recording a picture
View all Sony DCR-PC5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
- Recording - Basics - Recording a picture Your camcorder automatically focuses for you. (1) Remove the lens cap and pull the lens cap string to fix it. (2) Install the power source and insert a cassette. See "Step 1" and "Step 2" for more information (p. 10 to 15). (3) Pull out the viewfinder until it clicks. (4) Pull down the Holding Grip. Hold your camcorder firmly as illustrated. (5) Set the POWER switch to CAMERA while pressing the small green button. Your camcorder is set to the standby mode. (6) Press START/STOP. Your camcorder starts recording. The "REC" indicator appears. The camera recording lamp located on the front of your camcorder lights up. To stop recording, press START/STOP again. 5 LOCK 1 POWER LOCK Microphone MEMORY VCR OFF CAMERA 3 2 6 4 POWER LOCK 40min REC 0:00:01 Camera recording lamp MEMORY VCR OFF CAMERA After recording (1) Set the POWER switch to OFF. (2) Set the Holding Grip and the viewfinder back to the previous position. (3) Eject the cassette. (4) Remove the battery pack. Notes •Fasten the grip strap firmly. Do not touch the built-in microphone during recording. •When the viewfinder is not pulled out until it clicks, the picture does not appear in the viewfinder even if the LCD panel is closed. 18