Sony DCR-PC5 Operating Instructions - Page 28
Playing back a tape, To control the display of the screen indicators, Using the data code function
View all Sony DCR-PC5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Playing back a tape When monitoring on the LCD screen You can turn the LCD panel over and move it back to the camcorder body with the LCD screen facing out. If you leave the power on for a long time Your camcorder gets warm. This is not a malfunction. When you open/close the LCD panel Open/close the LCD panel vertically. When monitoring in the viewfinder Turn the LCD panel over and move it back to the camcorder body with the LCD screen facing out, and pull out the viewfinder until it clicks. In this case, the picture is not displayed on the LCD screen. To control the display of the screen indicators Press DISPLAY/TOUCH PANEL on your camcorder or DISPLAY on the Remote Commander supplied with your camcorder. The indicators disappear on the LCD screen. To make the indicators appear, press DISPLAY/TOUCH PANEL again. Using the data code function Your camcorder automatically records not only images on the tape but also the recording data (date/time or various settings when recorded) (Data code). Follow the steps below to display the data code using the touch panel or the Remote Commander. Using the touch panel (1) In the playback mode, press FN and select PAGE3. (2) Press DATA CODE. DATACODE OFF OK CAM DATE DATA DATA (3) Select CAM DATA or DATE DATA, then press OK. (4) Press EXIT. 28