Sony DCRPC110 Operating Instructions - Page 70
Using the i.LINK cable DV connecting cable, When you have finished dubbing a tape, Using the Remote
UPC - 027242580763
View all Sony DCRPC110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Recording video or TV programs Using the i.LINK cable (DV connecting cable) Simply connect the i.LINK cable (DV connecting cable) (not supplied) to DV IN/OUT and to DV IN/OUT of the DV products. With digital-to-digital connection, video and audio signals are transmitted in digital form for high-quality editing. (1) Insert a blank tape (or a tape you want to record over) into your camcorder, and insert the recorded tape into the VCR. (2) Set the POWER switch to VCR on your camcorder. (3) Set DISPLAY in to LCD in the menu settings (p. 84). (4) Press z REC and the button on its right simultaneously on your camcorder, then immediately press X on your camcorder. (5) Press N on the VCR to start playback. The picture to be recorded appears on the LCD screen or in the viewfinder. (6) Press X on your camcorder at the scene where you want to start recording from. 4 REC PAUSE DV S VIDEO LANC DV OUT (not supplied) DV IN/OUT : Signal flow When you have finished dubbing a tape Press x on both your camcorder and the VCR. Using the Remote Commander In step 4, press z REC and MARK simultaneously, then immediately press X. And in step 6, press X at the scene where you want to start recording from. Note on the Remote Commander Your camcorder works in the commander mode VTR 2. Commander modes 1, 2 and 3 are used to distinguish your camcorder from other Sony VCRs to avoid remote control misoperation. If you use another Sony VCR in the commander mode VTR 2, we recommend changing the commander mode or covering the sensor of the VCR with black paper. You can connect one VCR only using the i.LINK cable (DV connecting cable) During digital editing The color of the display may be uneven. However this does not affect the dubbed picture. If you record playback pause picture with the DV IN/OUT jack The recorded picture becomes rough. And when you play back the picture using your camcorder, the picture may jitter. Before recording Make sure if the DV IN indicator appears on the LCD screen or in the viewfinder. The 70 DV IN indicator may appear on both equipment.