Sony DSC-P8 Operating Instructions - Page 26
Shooting images against a, light source
View all Sony DSC-P8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Selecting a flash mode 60min VGA 101 96 S AF , Set the mode dial to , and press v ( ) on the control button repeatedly to select a flash mode. Each time you press v ( ), the indicator changes as follows. No indicator (Auto): The flash automatically strobes when shooting images in a dark place or against a light source. (Forced flash): The flash strobes regardless of the surrounding brightness. SL (Slow synchro): The flash strobes regardless of the surrounding brightness. The shutter speed is slow in a dark place, so you can clearly shoot the background that is out of flash light. (No flash): The flash does not strobe. 26 • If the menu is currently displayed, press MENU first so that the menu disappears. • You can also carry out this operation when the mode dial is set to or (Clip Motion). • When [ISO] is set to [Auto] in the menu settings, the recommended shooting distance using the flash is as follows: DSC-P10/P12: Approx. 0.5 m to 3.5 m (19 3/4 inches to 11 feet 5 3/16 inches) (W)/0.6 m to 2.5 m (23 5/8 inches to 8 feet 2 7/16 inches) (T) DSC-P8: Approx. 0.5 m to 3.5 m (19 3/4 inches to 11 feet 5 3/16 inches) (W)/0.5 m to 2.5 m (19 3/4 inches to 8 feet 2 7/16 inches) (T) • You can change the brightness of the flash with [Flash Level] in the menu settings (page 50). (You cannot change the brightness of the flash while the mode dial is set to .) • When using the SL (Slow synchro) or (No flash) mode, the shutter speed becomes slower in dark places, so using a tripod is recommended. • While charging the flash, the /CHG lamp flashes. After the charging is complete, the lamp goes out. • This setting is maintained even when the power is turned off. Shooting images against a light source In auto adjustment mode, shooting against a light source automatically strobes even when there is enough light around the subject (Daylight synchro). Before strobed When strobed • Daylight synchro may not procedure the desired effects depending on shooting conditions. • When you do not want to use the flash, set the flash mode to (No flash).