Sony DSC-P8 Operating Instructions - Page 27

To reduce the red-eye, phenomenon when shooting, live subjects, Shooting images with the AF,

Page 27 highlights

Shooting still images To reduce the red-eye phenomenon when shooting live subjects Set [Red Eye Reduction] to [On] in the SET UP settings (page 104). indicator appears on the LCD screen, and the flash pre-strobes before shooting to reduce the red-eye phenomenon. m Shooting images with the AF illuminator The AF illuminator is fill light to focus more easily on a subject in dark surroundings. Set [AF Illuminator] (page 104) to [Auto] in the SET UP settings. ON appears on the LCD screen and the AF illuminator emits red light when the shutter button is pressed halfway until the focus is locked. 60min ON VGA FINE 101 96 S AF F2.8 30 • When 9 (Focus) is set to [Multi AF] or [Center AF], the AF range finder is not displayed. or flashes and the centrally-located subject has priority to focus on. • The AF illuminator operates only when SCN is set to (Beach mode), (Snow mode) or (Twilight portrait mode) in the menu settings (page 55). • The AF illuminator emits very bright light. Although there are no problems with safety, directly looking into the AF illuminator emitter at close range is not recommended, as you may see residual spots for several minutes afterwards, such as after looking into a flashlight. • Red-eye reduction may not produce the desired effects depending on individual differences, the distance to the subject, if the subject does not see the pre-strobe, or other conditions. • If AF illuminator light does not reach the subject sufficiently or the subject has no contrast, focus will not be achieved. (A distance up to approximately 3.5 m (11 feet 5 3/16 inches) (W)/2.5 m (8 feet 2 7/16 inches) (T) is recommended.) • Focus is achieved as long as AF illuminator light reaches the subject, even if the light is slightly off the center of the subject. • When the focus preset distance is set (page 44), the AF illuminator does not function. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120

27
Shooting still images
To reduce the red-eye
phenomenon when shooting
live subjects
Set [Red Eye Reduction] to [On] in the SET
UP settings (page 104).
indicator
appears on the LCD screen, and the flash
pre-strobes before shooting to reduce the
red-eye phenomenon.
Red-eye reduction may not produce the desired
effects depending on individual differences, the
distance to the subject, if the subject does not
see the pre-strobe, or other conditions.
Shooting images with the AF
illuminator
The AF illuminator is fill light to focus
more easily on a subject in dark
surroundings. Set [AF Illuminator]
(page 104) to [Auto] in the SET UP
settings.
appears on the LCD screen
and the AF illuminator emits red light when
the shutter button is pressed halfway until
the focus is locked.
If AF illuminator light does not reach the
subject sufficiently or the subject has no
contrast, focus will not be achieved. (A distance
up to approximately 3.5 m (11 feet 5 3/16
inches) (W)/2.5 m (8 feet 2 7/16 inches) (T) is
recommended.)
Focus is achieved as long as AF illuminator
light reaches the subject, even if the light is
slightly off the center of the subject.
When the focus preset distance is set (page 44),
the AF illuminator does not function.
When
9
(Focus) is set to [Multi AF] or
[Center AF], the AF range finder is not
displayed.
or
flashes and the
centrally-located subject has priority to focus
on.
The AF illuminator operates only when SCN is
set to
(Beach mode),
(Snow mode) or
(Twilight portrait mode) in the menu
settings (page 55).
The AF illuminator emits very bright light.
Although there are no problems with safety,
directly looking into the AF illuminator emitter
at close range is not recommended, as you may
see residual spots for several minutes
afterwards, such as after looking into a
flashlight.
m
ON
VGA
101
96
F2.8
30
ON
S AF
FINE
60
min