Sony DSLR-A100K User Guide - Page 103
Delete conf., Clean CCD - charger
View all Sony DSLR-A100K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Setup menu For details on the operation 1 page 80 Delete conf. Before deleting images or folders, a confirmation screen, such as "Delete this image?", appears. Normally, [No] is selected by default, but you can set this default option so that [Yes] is selected. "Yes" [Yes] is selected by default. "No" [No] is selected by default. • This setting applies to both deleting images and folders. Clean CCD If dust or debris enters the camera and lands on the CCD (the part that acts as the film), it may appear on the photo image, depending on the shooting environment. If there is dust on the CCD, use a commercially available blower brush and clean the CCD following the steps below. You can easily brush the dust away using only the blower brush and the anti-dust function. • Cleaning can be performed only when the battery level is . Low battery power during cleaning can cause damage to the shutter. The cleaning should be completed quickly. 1 Confirm that the battery is fully charged. • The use of an AC Adaptor/charger (not supplied) is recommended. 2 Select [Clean CCD], then select [Enter]. The message "After cleaning the CCD, turn camera off. Continue?" appears. 3 Select [Yes] with b on the controller, and press the center of the controller. • After the CCD vibrates for a short time, the mirror in front is lifted. 4 Detach the lens. 5 Use the blower brush to clean the CCD surface and the surrounding area. • Do not touch the CCD with the tip of the brush. Complete the cleaning quickly. • Hold the camera's face downward to prevent the dust from resettling in the camera. • Do not use a spray blower because it may scatter vapor inside the camera body. 103