Sony DSLR-A100K User Guide - Page 104
Reset default, When cleaning the CCD, do not put the tip of a blower brush into the cavity
View all Sony DSLR-A100K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
For details on the operation 1 page 80 • When cleaning the CCD, do not put the tip of a blower brush into the cavity beyond the lens mount. You do not need to put the blower brush close to the CCD. 6 Attach the lens and set the POWER switch to OFF. • The camera starts beeping if the battery pack becomes low during cleaning. Stop the cleaning immediately and set the POWER switch to OFF. z To keep dust from entering the camera While it is impossible to completely shut out dust, the following reminders should help lower the possibility. • Choose a location with little dust to change the lens, and complete the operation quickly. • Do not leave the camera without a lens or the body cap. • When attaching the body cap, remove all the dust from the cap before placing it on the camera. Reset default You can reset the main functions of the camera. 1 Select [Enter] in [Reset default]. The message "Reset default?" appears. 2 Select [Yes] with b on the controller, then press the center of the controller. The main functions are reset. • For details on the items to be reset, see "Reset default" (page 151). 104