Sony DSLR-A100K User Guide - Page 98
Setup menu 1, LCDbrightness, Transfer mode, Video output
View all Sony DSLR-A100K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Setup menu 1 Setup menu For details on the operation 1 page 80 The default settings are marked with . LCDbrightness You can adjust the brightness of the LCD monitor. 1 Select [Enter] in [LCDbrightness]. 2 Adjust the brightness with b/B on the controller or with the control dial, then press the center of the controller. Transfer mode Selects the USB mode to be used when connecting the camera to a computer, etc., using a USB cable. Mass Storage Used for copying images to the computer. The camera is recognized as a USB mass storage device. PTP Prints the images with a PictBridge compliant printer or copies images to PTP (Picture Transfer Protocol) compliant devices. • For details on printing with a PictBridge compliant printer, see page 123. Video output Sets the video signal output according to the TV color system of the connected video equipment. Different countries and regions use different TV color systems. If you want to view images on a TV screen, check page 79 for the TV color system of the country or region where the camera is used. NTSC Sets the video output signal to NTSC mode (e.g., for the USA, Japan). PAL Sets the video output signal to PAL mode (e.g., for Europe). 98