Sony DSLR-A100K User Guide - Page 134
CF card/Microdrive, Printing, PictBridge compliant printer, The color of the image is strange.
View all Sony DSLR-A100K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
"Memory Stick PRO Duo" is not recognized by a computer with a "Memory Stick" slot. • If "Memory Stick PRO Duo" is not supported, connect the camera to the computer (pages 107 to 108). The computer recognizes the "Memory Stick PRO Duo". CF card/Microdrive Cannot insert a CF card/Microdrive. • Insert it in the correct direction (t step 4 in "Read This First"). Cannot record on a CF card/Microdrive. • The CF card/Microdrive is full. Delete unnecessary images (page 88, t step 6 in "Read This First"). • An unusable CF card is inserted (t step 4 in "Read This First"). • You are using the recording medium with the write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position. The Microdrive is heated. • You are using the Microdrive for a long time. This is not a malfunction. You have formatted a CF card/Microdrive by mistake. • All the data on the CF card/Microdrive is deleted by formatting. You cannot restore it. Printing Also see "PictBridge compliant printer" (as follows) in conjunction with the following items. The color of the image is strange. • When you print the images recorded in Adobe RGB mode using sRGB printers that are not compatible with Adobe RGB (DCF2.0/Exif2.21), the images are printed at a lower intensity level (page 50). PictBridge compliant printer A connection cannot be established. 134 • The camera cannot be connected directly to a printer that is not compliant with the PictBridge standard. Consult the printer manufacturer as to whether the printer is compliant with PictBridge or not. • Check that the printer is turned on and can be connected to the camera. • When a recording medium, such as a "Memory Stick Duo", CF card, is not inserted to the camera the camera cannot connect to the printer. After you insert a recording medium, connect the printer again. • Set [Transfer mode] to [PTP] (page 98).