Sony EVIHD7V Product Manual (HD Color Video Camera) - Page 15
White Balance, Zoom/Focus
View all Sony EVIHD7V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Zoom/Focus Mode Command CAM_Zoom Tele/Wide/Stop [VISCA] CAM_Zoom Tele/Wide/Stop [RC] CAM_Zoom Direct D-Zoom Limit CAM_Focus Far/Near/Stop [VISCA] CAM_Focus Far/Near/Stop [RC] CAM_Focus Direct CAM_Focus Mode (Auto/Manual) CAM_Focus One Push Trigger CAM_Focus Infinity CAM_Focus Near Limit Power Off1) No No No No No No No No No No No IFC2) No No No No No No No No No No No Initializing3) No No No No No No No No No No No Zoom Direct No No Yes No Yes Yes Yes Yes Yes Yes Yes Power On Focus Direct Yes Yes Yes Yes No No Yes No No No No AF ON Yes Yes Yes Yes No No No Yes No Yes Yes During displaying the menu No4) No4) No4) No4) No4) No4) No4) No4) No4) No4) No4) Memory Recall No No No No No No No No No No No 1) DC power is being supplied, but the camera has been turned off by a VISCA command. 2) The period from the time IF Clear is sent, until the Reply Packet is returned. 3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently finishes the pan/tilt reset operation and stops at the Home position, until the video signal is output. Or the period from the time the CAM Power ON command is sent, until Completion is returned. 4) The camera is not limited in operation due to the menus. But the camera follows the operational restrictions of the current mode while the camera is receiving the command in each mode. White Balance Mode Command CAM_WB Auto/Indoor/Outdoor/ OnePhshWB/Manual CAM_WB One Push Trigger CAM_WB R(B) Gain Reset/Up/Down/Direct Power Off1) No No No IFC2) No No No Initializing3) No No No Auto Yes No No Power On White balance mode Indoor Outdoor One Push Yes Yes Yes No No Yes5) No No No Manual During displaying Memory Recall the menu Yes No4) No No No4) No Yes No4) No 1) DC power is being supplied, but the camera has been turned off by a VISCA command. 2) The period from the time IF Clear is sent, until the Reply Packet is returned. 3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently finishes the pan/tilt reset operation and stops at the Home position, until the video signal is output. Or the period from the time the CAM Power ON command is sent, until Completion is returned. 4) The camera is not limited in operation due to the menus. But the camera follows the operational restrictions of the current mode during IFC executing/initializing/white balance mode operation. 5) Commands are ignored during a One Push AWB operation. Basic Functions 15