Sony EVIHD7V Product Manual (HD Color Video Camera) - Page 30

EVI-HD7V/HD3V Inquiry Command List (2/2) Inquiry Command Video SystemInq Command Packet 8x 09 06 23 FF Next Power ON Video SystemInq 1) 8x 09 06 33 FF IR_Receive IR_ReceiveReturn 8x 09 06 08 FF IR_ConditionInq 8x 09 06 34 FF Inquiry Packet y0 50 00 FF y0 50 01 FF y0 50 02 FF y0 50 03 FF y0 50 04 FF y0 50 05 FF y0 50 08 FF y0 50 09 FF y0 50 0A FF y0 50 0B FF y0 50 0C FF y0 50 00 FF y0 50 01 FF y0 50 02 FF y0 50 03 FF y0 50 04 FF y0 50 05 FF y0 50 08 FF y0 50 09 FF y0 50 0A FF y0 50 0B FF y0 50 0C FF y0 50 02 FF y0 50 03 FF y0 07 7D 01 04 00 FF y0 07 7D 01 04 07 FF y0 07 7D 01 04 38 FF y0 07 7D 01 04 33 FF y0 07 7D 01 04 3F FF y0 07 7D 01 06 01 FF y0 50 00 FF y0 50 01 FF y0 50 02 FF Pan-tiltMaxSpeedInq 8x 09 06 11 FF y5 50 ww zz FF Pan-tiltPosInq 8x 09 06 12 FF y5 50 0w 0w 0w 0w 0z 0z 0z 0z FF Pan-tiltModeInq 8x 09 06 10 FF y5 50 pq rs FF Color system Inq 8x 09 7E 01 03 FF y0 50 00 FF y0 50 01 FF Cooling fan condirion Inq 8x 09 7E 01 38 FF y0 50 00 FF y0 50 01 FF 1) Can be configured when the SYSTEM SELECT switch at the rear of the camera is set to position 7. Use one of the following methods to apply the settings. • Turn off DC power, and turn it on again. • Turn off power using the IR remote commander, and turn it on again. • Send CAM_Power On and Off commands. Command List Comments Video format Output HD7V HD3V connector 1920×1080p/59.94 Yes No 59.94 Hz DVI-D 1920×1080p/29.97 Yes No system 1920×1080i/59.94 Yes No 1280×720p/59.94 Yes Yes 1280×720p/29.97 Yes Yes 640×480p/59.94 Yes Yes (Letter Box) 1920×1080p/50 Yes No 50 Hz 1920×1080p/25 Yes No system 1920×1080i/50 Yes No 1280×720p/50 Yes Yes 1280×720p/25 Yes Yes Video format Output HD7V HD3V connector 1920×1080p/59.94 Yes No 59.94 Hz DVI-D 1920×1080p/29.97 Yes system No 1920×1080i/59.94 Yes No 1280×720p/59.94 Yes Yes 1280×720p/29.97 Yes Yes 640×480p/59.94 Yes Yes (Letter Box) 1920×1080p/50 Yes No 50 Hz 1920×1080p/25 Yes system No 1920×1080i/50 Yes No 1280×720p/50 Yes Yes 1280×720p/25 Yes Yes On Off Power ON/OFF Zoom tele/wide AF On/Off CAM_Backlight CAM_Memory Pan_tiltDrive Stable reception from the IR Remote Commander Unstable reception from the IR Remote Commander Impossible to detect the infrared signals from the Remote Commander because the camera is turned on by the Remote Commander. ww = Pan Max Speed xx = Tilt Max Speed wwww = Pan Position zzzz = Tilt Position Speed See page 37. pqrs: Pan-tilt Status See page 37. RGB YPbPr Working Stop 30