Sony HDRXR100 Operating Guide - Page 8
Supplied items, Notes on use, only for HDR-XR200/XR200V - software
UPC - 027242765238
View all Sony HDRXR100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Supplied items The numbers in ( ) are the supplied quantity. AC Adaptor (1) Power cord (Mains lead) (1) Component A/V cable (1) A/V connecting cable (1) USB cable (1) Wireless Remote Commander (1) (only for HDR-XR200/XR200V) A button-type lithium battery is already installed. Remove the insulation sheet before using the Wireless Remote Commander. Insulation sheet Rechargeable battery pack NP-FH60 (1) CD-ROM "Handycam Application Software" (1) "PMB" (software, including "PMB Guide") "Handycam Handbook" (PDF) "Operating Guide" (This manual) (1) See page 44 for the "Memory Stick" media you can use with this camcorder. Notes on use Using the camcorder The camcorder is not dustproofed, dripproofed or waterproofed. See "Precautions" (p. 54). Do not do any of the following when the (Movie)/ (Photo) mode lamps (p. 15) or the ACCESS lamps (p. 13), the access lamp (p. 44) are lit or flashing. Otherwise, the recording media may be damaged, recorded images may be lost or other malfunctions could occur. US ejecting the "Memory Stick PRO Duo" media removing the battery pack or AC Adaptor from the camcorder Do not apply shock or vibration to the camcorder. The camcorder may not be able to record or play movies and photos. Do not use the camcorder in very loud areas. The camcorder may not be able to record or play movies and photos. When connecting the camcorder to another device with communication cables, be sure to insert the connector plug in the correct way. Pushing the plug forcibly into the terminal will damage the terminal and may result in a malfunction of the camcorder. Do not close the LCD screen when the camcorder is connected to another device with the USB cable. Your recorded images may be lost. Even if the camcorder is turned off, the GPS function is working as long as the GPS switch is set to ON. Make sure that the GPS switch is set to OFF during take off and landing of an airplane (HDR-XR200V). To protect the internal hard disk from shock by dropping, the camcorder has drop sensor function. When a drop occurs, or under a nongravity condition, the block noise made when this function is activated by the camcorder may also be recorded. If the drop sensor catches a drop repeatedly, recording/playback may be stopped. When the temperature of the camcorder becomes extremely high or extremely low, you may not be able to record or play back on the camcorder, due to the protection features of the camcorder being activated in such situations. In this case, a message appears on the LCD screen (p. 53). Do not turn on the camcorder in a low-pressure area, where the altitude is more than 5,000 meters (16,000 feet). Doing so may damage the hard disk drive of the camcorder. If you repeat recording/deleting images for a long time, fragmentation of data occurs on the recording media. Images cannot be saved or recorded. In such a case, save your images