Sony HVRZ7P Operating Guide - Page 11

Adjusting the flange focal length, automatically, manually, Select [YES] with the SEL/PUSH

Get Sony HVRZ7P PDF manuals and user guides View all Sony HVRZ7P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

MANUAL ZOOM SERVO Adjusting the flange focal length automatically 1 Set the ND filter B to 1 to adjust brightness so that the proper video light level is obtained. 2 Place the flange focal length adjustment test chart A about 2-3 meters (7-10 feet) away. Zoom in and set your camcorder to locate the center of the chart in the center of the screen. 3 Set the ZOOM switch F to SERVO. 4 Select [AUTO ADJUST] in [FLANGE BACK] of the (CAMERA SET) menu (p. 75). 5 Select [YES] with the SEL/PUSH EXEC dial E. The flange focal length adjustment starts and [EXECUTING] appears on the screen. When the adjustment is completed, [Completed.] appears on the screen. If the adjustment fails, [Could not adjust.] appears on the screen. Try the adjustment again. Adjusting the flange focal length manually 1 Perform steps 1 and 2 of "Adjusting the flange focal length automatically." 2 Set the ZOOM switch F to MANUAL. 3 Select [MANU ADJUST] in [FLANGE BACK] of the (CAMERA SET) menu. 4 Select [YES] with the SEL/PUSH EXEC dial E. 5 Turn the zoom ring D to the telephoto position. 6 Turn the focus ring C until the subject comes in focus, then press the SEL/ PUSH EXEC dial E. 7 Turn the zoom ring D to the wide angle position. 8 Turn the focus ring C until the subject comes in focus, then press the SEL/ PUSH EXEC dial E. When the adjustment is completed, [Completed.] appears on the screen. If the adjustment fails, [Could not adjust.] appears on the screen. Try the adjustment again. z Tips • You can check the focusing easily if you do the following before adjusting the focal length. - Set [PEAKING] in the (DISPLAY SET) menu to [ON] (p. 78). - Press the ASSIGN button to which [EXP.FOCUS] is assigned (L2 button by default) (p. 43). Continued , 11 Getting Started

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
11
Getting Started
Adjusting the flange focal length
automatically
1
Set the
ND
filter
B
to 1 to adjust
brightness so that the proper video light
level is obtained.
2
Place the flange focal length adjustment
test chart
A
about 2-3 meters (7-10
feet) away. Zoom in and set your
camcorder to locate the center of the
chart in the center of the screen.
3
Set the ZOOM switch
F
to SERVO.
4
Select [AUTO ADJUST] in [FLANGE
BACK] of the
(CAMERA SET)
menu
(p. 75)
.
5
Select [YES] with the SEL/PUSH
EXEC dial
E
.
The flange focal length adjustment starts
and [EXECUTING] appears on the screen.
When the adjustment is completed,
[Completed.] appears on the screen.
If the adjustment fails, [Could not adjust.]
appears on the screen. Try the adjustment
again.
Adjusting the flange focal length
manually
1
Perform steps
1
and
2
of “Adjusting
the flange focal length automatically.”
2
Set the ZOOM switch
F
to MANUAL.
3
Select [MANU ADJUST] in [FLANGE
BACK] of the
(CAMERA SET)
menu.
4
Select [YES] with the SEL/PUSH
EXEC dial
E
.
5
Turn the zoom ring
D
to the telephoto
position.
6
Turn the focus ring
C
until the subject
comes in focus, then press the SEL/
PUSH EXEC dial
E
.
7
Turn the zoom ring
D
to the wide angle
position.
8
Turn the focus ring
C
until the subject
comes in focus, then press the SEL/
PUSH EXEC dial
E
.
When the adjustment is completed,
[Completed.] appears on the screen.
If the adjustment fails, [Could not adjust.]
appears on the screen. Try the adjustment
again.
z
Tips
•
You can check the focusing easily if you do the
following before adjusting the focal length.
–
Set [PEAKING] in the
(DISPLAY
SET) menu to [ON] (p. 78).
–
Press the ASSIGN button to which
[EXP.FOCUS] is assigned (L2 button by
default) (p. 43).
ZOOM
SERVO
MANUAL
Continued
,