Sony HVRZ7P Operating Guide - Page 74
S.trans/f.mark, X.v.color, Color Bar, Shot Transition, Focus Marking, On/off
View all Sony HVRZ7P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Press the MENU button t select the (CAMERA SET) with the SEL/PUSH EXEC dial. S.TRANS/F.MARK You can select a function to be assigned to the SHOT TRANSITION/FOCUS MARKING button. B SHOT TRANSITION Select to assign the shot transition function to the button. FOCUS MARKING Select to assign the focus marking function to the button. x.v.Color When you set this function to [ON], you can record with the wider color range. Your camcorder can reproduce brilliant and vivid colors for flowers and the beautiful bluegreen of tropical oceans that cannot be matched by conventional technologies. b Notes • The colors may not be well reproduced when you play back a movie recorded with this function set to [ON] on a TV that does not support x.v.Color. • You cannot set [x.v.Color] in the following cases: - When recording in SD (standard) format - When recording movies • When you set [x.v.Color] to [ON], the picture profile will be disabled. COLOR BAR x ON/OFF When you select [ON], you can display color bars on the screen or record them on a tape. This function helps you to adjust colors when you view movies recorded with your camcorder on a TV or a monitor. The default setting is [OFF]. b Notes • This function is automatically set to [OFF] when you turn the power off and back on. x TYPE Selects a type of the color bars. TYPE 1 TYPE 2 TYPE 3 TYPE 4 (75% brightness of TYPE 3) x TONE Outputs audio tone signals (1 kHz: full bit -20 dB) when you set [TONE] to [ON]. The default setting is [OFF]. 74