Sony HVRZ7P Operating Guide - Page 38

Changing the settings of your camcorder recordings (Continued) COLOR CORRCT (Continued) Item [MEM1 COLOR] [MEM1 REVISN] [MEM2 COLOR] [MEM2 REVISN] Description and settings Sets colors stored in Memory 1. [PHASE] : Sets color phase. 0 (purple) t 8 (red) t 16 (yellow) t 24 (green) t 31 (blue) [RANGE] : Sets color phase range. 0 (no color selection), 1 (narrow: to select only a single color) to 31 (wide: to select multiple colors in similar color phase) [SATURATION] : Sets saturation. 0 (to select from light colors to dark colors) to 31 (to select dark color) [ONE PUSH SET]: Automatically sets [PHASE] for a subject at the center of the marker. [SATURATION] is set to 0. Corrects colors in Memory 1. [R GAIN] : Corrects the redness of the color in Memory 1. Tone of cyan becomes higher as the redness decreases. -15 (less reddish) to +15 (more reddish) 0 for no correction [B GAIN] : Corrects the blueness of the color in Memory 1. Tone of yellow becomes higher as the blueness decreases. -15 (less bluish) to +15 (more bluish) 0 for no correction Sets colors stored in Memory 2. See [MEM1 COLOR] for description and settings. Corrects colors in Memory 2. See [MEM1 REVISN] for description and settings. WB SHIFT To set items for the white balance shift. Item [FILTER TYPE] [LB[COL TEMP]] [CC[MG/GR]] [R GAIN] [B GAIN] Description and settings Selects a color filter type for the white balance shift. [LB-CC] : Film type (color conversion and correction) [R-B] : Video type (correction of R and B levels) Sets a color temperature offset value. -9 (bluish) to +9 (reddish) Sets a color correct offset value. -9 (greenish) to +9 (magentish) Sets an R level. -9 (low R level) to +9 (high R level) Sets a B level. -9 (low B level) to +9 (high B level) 38