Sony HVRZ7P Operating Guide - Page 12

Step 2: Attaching the supplied items (Continued) Attaching the supplied microphone The channel to be used differs depending on the relationship between the REC CH SELECT switch positions and the input jacks. See the table below. REC CH SELECT switch position CH1, CH2 CH1 Input jack Channel to be used INPUT1 Channel1 Channel2 INPUT2 - INPUT1 Channel1 INPUT2 Channel2 INPUT2 INPUT1 LINE MIC MIC LINE MIC MIC INPUT2 INPUT1 1 Attach the wind screen B to the supplied microphone A. 2 Place the microphone A in the microphone holder C with the model name facing upward, close the cover, and shut the clamp. 3 Connect the plug of the microphone to the INPUT1 jack D. 4 Put the microphone cable into the cable holder E. 5 Select the channel with the REC CH SELECT switch F. 12 z Tips • See page 41 for adjusting the volume. • Set the INPUT1/INPUT2 switch to MIC+48V when you use the supplied microphone. Attaching the lens hood with lens cover PUSH (lens hood release) button Align the marks on the lens hood to those on the camcorder, and turn the lens hood in the direction of the arrow 2. To remove the Lens hood with lens cover Turn the lens hood in the opposite direction to the arrow 2 in the illustration while