Sony HVRZ7P Operating Guide - Page 76
Separate, Linked, Au.man Gain, Input1 Mic Nr, Input1 Trim, Input1 Wind
View all Sony HVRZ7P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Press the MENU button t select the (AUDIO SET) with the SEL/PUSH EXEC dial. B SEPARATE Separately applies the AGC for CH1/CH2. Sound inputs from CH1/CH2 will be recorded as separate sound. LINKED Applies the AGC of CH1 linked with that of CH2. Sound inputs from CH1/CH2 will be recorded as a set of sound such as stereo sound. A appears on the status check screen. b Notes • This function is available when the CH1 and CH2 switches are set to AUTO and the INPUT1 and INPUT2 switches are both set to MIC or both set to LINE (p. 41). x AU.MAN GAIN You can select either linked or separate audio level control of CH1and CH2 when using an external microphone. B SEPARATE Separately controls the audio levels of CH1 and CH2. Sound inputs from CH1 and CH2 will be recorded as separate sound. LINKED Controls the audio level of CH1 linked with that of CH2. Sound inputs from CH1 and CH2 will be recorded as a set of sound such as stereo sound. M appears on the status check screen. b Notes • This function is available when the CH1 and CH2 switches are set to MAN and the INPUT1 and INPUT2 switches are both set to MIC or both set to LINE (p. 41). • When you select [LINKED], you can adjust the volume with the AUDIO LEVEL dial of CH1 (p. 41). x INPUT1 MIC NR Reduces noise from the microphone. B ON Reduces noise from the microphone. appears on the status check screen. 76 OFF Does not reduce noise from the microphone. b Notes • The setting is not effective when you set the INPUT1 switch to LINE. x INPUT1 TRIM Adjusts the input signal level from INPUT1. You can select from [-18dB], [-12dB], [-6dB], [0dB], [6dB] and [12dB]. The default setting is [0dB]. b Notes • The setting is not effective when you set the INPUT1 switch to LINE. x INPUT1 WIND B OFF Disables wind noise reduction. ON Enables wind noise reduction. appears on the status check screen. b Notes • The setting is not effective when you set the INPUT1 switch to LINE. x INPUT2 MIC NR x INPUT2 TRIM x INPUT2 WIND You can set INPUT2 in the same way as INPUT1. z Tips • 48 dBu is set as 0dB in your camcorder. • Set [INPUT TRIM] to [0dB] for the supplied microphone (ECM-XM1). • Set [INPUT TRIM] to [12dB] for the optional microphone (Sony ECM-NV1). • The INPUT TRIM function adjusts the input level from an external microphone. When using a highly sensitive microphone or recording loud sound, set this to the minus side. When using a less sensitive microphone or recording quiet sound, set it to the plus side.