Sony HVRZ7P Operating Guide - Page 77

• When recording loud sound, the sound may be distorted at either the input point or the recording point. If it is distorted at the input point, adjust the sound using the INPUT TRIM function. If it is distorted at the recording point, lower the total volume level manually. • If you set INPUT TRIM too far to the minus side, the microphone volume becomes too low, resulting in a poor signal to noise ratio. • Test the effect of the INPUT TRIM function according to the microphone used or the sound field of the recording site before actual recording. AUDIO CH SEL B CH1,CH2 Reproduces sound of CH1 and CH2 in respective channels. CH1 Reproduces sound of CH1 in channels 1 and 2. CH2 Reproduces sound of CH2 in channels 1 and 2. z Tips • When you select [CH1,CH2] and play back a tape on your camcorder, sound of CH1 + CH2 comes out of the speakers. DV AUDIO MIX You can monitor the sound dubbed from another device or recorded through 4channel microphone during playback. You can set how to output the sound. B CH1,CH2 Outputs only the sound recorded in CH1 and CH2 during recording. MIX Outputs mixed sound of the sound recorded in CH1 and CH2 during recording and the sound dubbed in CH3 and CH4. CH3,CH4 Outputs only the sound dubbed in CH3 and CH4. 77 Using the Menu