Sony KLV-15SR1 Operating Instructions - Page 23

5 Press v to select "SEARCH" at the bottom, then press OK. MANUAL SET-UP PROGRAMME 2 OK VHF-L OK EXIT : MENU 6 Press b to search for a higher-numbered channel, or press B for a OK lower-numbered channel. MANUAL SET-UP PROGRAMME 2 VHF-L OK EXIT : MENU Press B or b again if the broadcast that appears on the TV screen is not the desired one. Repeat the procedure until your desired channel's broadcast appears. 7 When the desired channel is found, press OK. The "MANUAL SET-UP" menu reappears. MANUAL SET-UP PROGRAMME : 2 NAME : AAA SKIP : ON AFT SYSTEM : ON : B/G OK BAND SEARCH : VHF-L : OK EXIT : MENU 8 To preset other channels, repeat steps 1 to 7. To return to the normal screen Press MENU. To fine tune a programme Normally "AFT: ON" gives the best possible picture. However, you may manually fine tune the programme if the picture is distorted with "AFT: ON." While watching the programme, display the "MANUAL SET-UP" menu and select "AFT." Then press B or b to fine tune between -15 and +15 until the best possible picture is obtained. Note • If you perform "SEARCH" after fine tuning, "AFT" is automatically reset to "ON." To name the preset channel You can name the preset channel using up to five characters (letters or numbers, e.g., BBC). (1) Select the programme number with the preset channel you want to name on the "MANUAL SET-UP" menu. continued Adjusting Your Setup (MENU) 23