Sony LBT-GPX555 Operating Instructions - Page 26
Playing music from a, device, Bluetooth
View all Sony LBT-GPX555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
2 Press BLUETOOTH on the unit to select Bluetooth function. "BLUETOOTH" appears in the display panel. Note If the system is connected to a Bluetooth device, press BLUETOOTH to disconnect the Bluetooth device. 3 Hold down BLUETOOTH on the unit for 2 seconds or more. "PAIRING" flashes in the display panel. 4 Perform the pairing procedure on the Bluetooth device. For details, refer to the operating instructions of your Bluetooth device. 5 Select the model number of the unit on the display of the Bluetooth device. For example, select "SONY:MHC-GPX888" (or LBT-GPX555/MHC-GPX555). If passkey is required on the Bluetooth device, enter "0000". 6 Perform the Bluetooth connection on the Bluetooth device. When pairing is completed and the Bluetooth connection is established, Bluetooth device name appears in the display panel. Depending on the Bluetooth device, connection may start automatically after pairing is completed. You can check the Bluetooth device address by pressing DISPLAY repeatedly. Notes • You can pair up to 9 Bluetooth devices. If the 10th Bluetooth device is paired, the oldest paired device will be deleted. • "Passkey" may be called "Passcode", "PIN code", "PIN number" or "Password", etc., depending on the device. 26GB • The pairing standby status of the system is canceled after about 5 minutes. If pairing is not successful, repeat from step 1. • While connected to a Bluetooth device, this system cannot be detected and connection cannot be established from another Bluetooth device which is never paired before. • If you want to pair with another Bluetooth device, repeat steps 1 to 6. To cancel the pairing operation Hold down BLUETOOTH on the unit for 2 seconds or more until "BLUETOOTH" appears in the display panel. Playing music from a Bluetooth device You can operate a Bluetooth device by connecting the system and the Bluetooth device using AVRCP. Check the following before playing music: - The Bluetooth function of the Bluetooth device is turned on. - Pairing has been completed. 1 Press BLUETOOTH on the unit to select Bluetooth function. "BLUETOOTH" appears in the display panel. 2 Establish connection with the Bluetooth device. The last connected Bluetooth device will be connected automatically. Perform the Bluetooth connection from the Bluetooth device if the device is not connected. Once the connection is established, the Bluetooth device name appears in the display panel. 3 Press N to start playback. Depending on the Bluetooth device, - you may need to press N twice. - you may need to start playing an audio source on the Bluetooth device.