Sony LBT-GPX555 Operating Instructions - Page 30

Creating a party atmosphere (DJ EFFECT) 1 Press the following button to select the effect type. The selected button lights up and the effect is activated. • FLANGER: Create a deep flanging effect that is similar to the roar of a jet plane. • ISOLATOR: Isolate a specific frequency band by adjusting the other frequency bands. For example, when you want to focus on vocals. • PAN: Create a feeling that the sound is moving around the speakers between left and right channels. • WAH: Create a special effect of "Wah-wah" sound by moving the frequency of a filter up and down automatically. 2 Press DJ CONTROL +/- to adjust the effect level. To turn off the effect Press the selected effect button again. Notes • The DJ EFFECT is automatically turned off when you turn off the system or change the function or tuner band. • If you activate the DJ EFFECT during transfer, the sound effect will not be transferred to the USB device. • You cannot use VOLUME/DJ CONTROL on the unit to adjust the volume when the DJ EFFECT is activated. Press VOLUME +/- on the remote control to adjust the volume. Other Operations Using the Party Chain function You can connect multiple audio systems in a chain to create a more interesting party environment and to produce higher sound output. Activate a system in the chain to be the "Party Host" and share the music. Other systems will become "Party Guest" and play the same music as the "Party Host". Setting up the Party Chain You can set up a Party Chain by connecting all the systems using audio cords (not supplied). Before connecting cords, be sure to disconnect the power cord. 30GB