Sony LBT-GPX555 Operating Instructions - Page 44

Specifications, AUDIO POWER

Page 44 highlights

Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA model only) With 4 ohm loads, both channels driven, from 120 - 10,000 Hz; rated 180 watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250 milliwatts to rated output. Amplifier section The following are measured at USA model: AC 120 V, 60 Hz Mexican model: AC 120 V - 240 V, 60 Hz Chilean and Bolivian models: AC 220 V - 240 V, 50 Hz Other models: AC 120 V - 240 V, 50/60 Hz MHC-GPX888 Front speaker Power Output (rated): 350 W + 350 W (at 4 ohms, 1 kHz, 1% THD) RMS output power (reference): 600 W + 600 W (per channel at 4 ohms, 1 kHz) Subwoofer RMS output power (reference): 600 W + 600 W (per channel at 4 ohms, 100 Hz) LBT-GPX555/MHC-GPX555 Front speaker Power Output (rated): 350 W + 350 W (at 4 ohms, 1 kHz, 1% THD) RMS output power (reference): 600 W + 600 W (per channel at 4 ohms, 1 kHz) 44GB Subwoofer RMS output power (reference): 600 W (4 ohms, 100 Hz) Inputs AUDIO IN 1/PARTY CHAIN IN L/R Voltage 2 V, impedance 47 kilohms AUDIO IN 2 L/R Voltage 2 V, impedance 47 kilohms MIC (MHC-GPX888 only) Sensitivity 1 mV, impedance 10 kilohms (USB) A, (USB) B port Type A Outputs AUDIO OUT/PARTY CHAIN OUT L/R Voltage 2 V, impedance 1 kilohm USB section Supported bit rate WMA: 48 kbps - 192 kbps, VBR, CBR AAC: 48 kbps - 320 kbps, VBR, CBR Sampling frequencies WMA: 44.1 kHz AAC: 44.1 kHz Supported USB device Mass Storage Class Maximum current 500 mA Disc/USB section Supported bit rate MPEG1 Layer-3: 32 kbps - 320 kbps, VBR MPEG2 Layer-3: 8 kbps - 160 kbps, VBR MPEG1 Layer-2: 32 kbps - 384 kbps, VBR Sampling frequencies MPEG1 Layer-3: 32 kHz/44.1 kHz/48 kHz MPEG2 Layer-3: 16 kHz/22.05 kHz/24 kHz MPEG1 Layer-2: 32 kHz/44.1 kHz/48 kHz

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

44
GB
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(USA model only)
With 4 ohm loads, both channels driven,
from 120 – 10,000 Hz; rated 180 watts per
channel minimum RMS power, with no
more than 0.7% total harmonic distortion
from 250 milliwatts to rated output.
Amplifier section
The following are measured at
USA model:
AC 120 V, 60 Hz
Mexican model:
AC 120 V – 240 V, 60 Hz
Chilean and Bolivian models:
AC 220 V – 240 V, 50 Hz
Other models:
AC 120 V – 240 V, 50/60 Hz
MHC-GPX888
Front speaker
Power Output (rated):
350 W + 350 W (at 4 ohms, 1 kHz,
1% THD)
RMS output power (reference):
600 W + 600 W (per channel at
4 ohms, 1 kHz)
Subwoofer
RMS output power (reference):
600 W + 600 W (per channel at
4 ohms, 100 Hz)
LBT-GPX555/MHC-GPX555
Front speaker
Power Output (rated):
350 W + 350 W (at 4 ohms, 1 kHz,
1% THD)
RMS output power (reference):
600 W + 600 W (per channel at
4 ohms, 1 kHz)
Subwoofer
RMS output power (reference):
600 W (4 ohms, 100 Hz)
Inputs
AUDIO IN 1/PARTY CHAIN IN L/R
Voltage 2 V, impedance 47 kilohms
AUDIO IN 2 L/R
Voltage 2 V, impedance 47 kilohms
MIC (MHC-GPX888 only)
Sensitivity 1 mV, impedance
10 kilohms
(USB) A,
(USB) B port
Type A
Outputs
AUDIO OUT/PARTY CHAIN OUT L/R
Voltage 2 V, impedance 1 kilohm
USB section
Supported bit rate
WMA:
48 kbps – 192 kbps, VBR, CBR
AAC:
48 kbps – 320 kbps, VBR, CBR
Sampling frequencies
WMA: 44.1 kHz
AAC: 44.1 kHz
Supported USB device
Mass Storage Class
Maximum current
500 mA
Disc/USB section
Supported bit rate
MPEG1 Layer-3:
32 kbps – 320 kbps, VBR
MPEG2 Layer-3:
8 kbps – 160 kbps, VBR
MPEG1 Layer-2:
32 kbps – 384 kbps, VBR
Sampling frequencies
MPEG1 Layer-3:
32 kHz/44.1 kHz/48 kHz
MPEG2 Layer-3:
16 kHz/22.05 kHz/24 kHz
MPEG1 Layer-2:
32 kHz/44.1 kHz/48 kHz