Sony LBT-GPX555 Operating Instructions - Page 38
Speakers, Disc player, USB device, Upper cases A to Z
View all Sony LBT-GPX555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Speakers Sound comes from only one channel or the left and right volume is unbalanced. • Place the speakers as symmetrically as possible. • Check that the speakers are connected securely and correctly. • The source being played back is monaural. There is no sound from a specific speaker. • Check that the speaker is connected securely and correctly. • Set the subwoofer level to the appropriate level (page 28). Disc player The disc tray does not open and "LOCKED" appears in the display panel. • Consult your nearest Sony dealer or local authorized Sony service facility. The disc tray does not close. • Load the disc correctly. The disc does not eject. • You cannot eject the disc during CD-USB Synchronized Transfer or REC1 Transfer. Press x to cancel the transfer, then press Z OPEN/CLOSE on the unit to eject the disc. • Consult your nearest Sony dealer. Playback does not start. • Wipe the disc clean (page 42). • Reload the disc. • Load a disc that this system can play back (page 36). • Remove the disc and wipe away the moisture on the disc, then leave the system turned on for a few hours until the moisture evaporates. The sound skips. • Wipe the disc clean (page 42). • Reload the disc. • Move the unit to a place with no vibration (e.g., on top of a stable stand). • Move the speakers away from the unit, or place them on separate stands. When you listen to a track with bass sounds at high volume, the speaker vibration may cause the sound to skip. Playback does not start from the first track. • Set the play mode to Normal Play (page 18). The folder name, track name, file name and ID3 tag characters do not appear properly. • The ID3 tag is not Version 1(1.0/1.1) or Version 2(2.2/2.3). • The character codes that can be displayed by this system are as follows: - Upper cases (A to Z) - Numbers (0 to 9) - Symbols Other characters appear as "_". USB device Transferring results in an error. • You are using an unsupported USB device. Check the information on the website about compatible USB devices (page 36). • The USB device is not formatted correctly. Refer to the operating instructions of the USB device on how to format. • Turn off the system and remove the USB device. If the USB device has a power switch, turn the USB device off and on again after removing it from the system. Then, perform the transfer again. 38GB