Sony MDX-C8500X Operating Instructions - Page 22
Selecting the listening, position
View all Sony MDX-C8500X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Adjusting the equalizer curve 1 Press (MENU). 2 Press either side of (DISC/PRST) repeatedly until "EQ Tune" appears, then press (ENTER). 3 Press either side of (SEEK/AMS) to select the desired equalizer curve, then press (ENTER). Each time you press (SEEK/AMS), the item changes as follows: Rock y Vocal y Groove y Techno y Custom y off y Rock 4 Select the desired frequency and level. 1 Press either side of (SEEK/AMS) to select the desired frequency. Each time you press (SEEK/AMS), the frequency changes as follows: 62 Hz y 157 Hz y 396 Hz y 1.0kHz y 2.5kHz y 6.3kHz y 16.0kHz 2 Press either side of (DISC/PRST) to adjust the desired volume level. The volume is adjustable by 1 dB steps from -12 dB to +12 dB. Selecting the listening position You can set a delayed time for the sound to reach the listeners from the speakers. In this way, the unit can simulate a natural sound field so that you feel as if you are in the centre of the sound field no matter where you sit in the car. Display window Centre of sound field 12 3 POS All POS Front POS Front-R POS Front-L Normal setting (1 + 2 + 3) Front part (1 + 2) Right front (2) Left front (1) POS Rear Rear part (3) POS off Cancel 1 Press (SOURCE) to select a source (tuner, CD, or MD). 2 Press (SOUND) repeatedly until "POS" appears. To restore the factory-set equalizer curve, press (ENTER) for two seconds. 5 Press (MENU) twice. When the effect setting is complete, the normal playback mode appears. 3 Press either side of (SEEK/AMS) to select the desired listening position. Each time you press (SEEK/AMS), the item changes as follows: All y Front y Front-R y Front-L y Rear y off y All To cancel the POS mode, select "off." After three seconds, the display returns to the normal playback mode. 22