Sony MDX-C8500X Operating Instructions - Page 25
Adjusting the volume of, the subwoofers, Listening to each, programme source in its, registered DSO
View all Sony MDX-C8500X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Adjusting the volume of the subwoofer(s) 1 Press (SOURCE) to select a source (tuner, CD, or MD). 2 Press (SOUND) repeatedly until "SUB" appears. 3 Press either side of (SEEK/AMS) to adjust the volume level. 4 Press (MENU) twice. After three seconds, the display returns to the normal playback mode. Tip When you lower the volume all the way down, "ATT" appears and the cut-off frequency of the subwoofer is disabled. Adjusting the frequency of the subwoofer(s) To match the characteristics of the connected subwoofer(s), you can cut out the unwanted high and middle frequency signals entering the subwoofer(s). By setting the cut-off frequency (see the diagram below), the subwoofer(s) will output only low frequency signals so you can get a clearer sound image. Cut-off frequency Level 1 Press (MENU). Frequency (Hz) 2 Press either side of (DISC/PRST) repeatedly until "SUB LPF" appears, then press (ENTER). 3 Select the desired frequency and level. 1 Press either side of (SEEK/AMS) to select the desired frequency. Each time you press (SEEK/AMS), the frequency changes as follows: 62 Hz y 78 Hz y 99 Hz y 125 Hz y 157 Hz y off 2 Press either side of (DISC/PRST) to adjust the desired volume level. The volume is adjustable by 1 dB steps from -12 dB to +12 dB. 4 Press (MENU) twice. After the frequency setting is complete, the display returns to the normal playback mode. Tip When you lower the volume all the way down, "ATT" appears and the cut-off frequency is disabled. Listening to each programme source in its registered DSO - Source Sound Memory (SSM) Each time you return to the same source, you can hear the same DSO menu and equalizer curve registered for that source, even after changing the programme source or turning the unit off and then on again. 25