Sony MZ-R91 Operating Instructions - Page 19
Sony MZ-R91 Manual
![]() |
View all Sony MZ-R91 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
5 While observing the level meter in the display, adjust the recording level by flipping the jog lever or pressing > (+) or . (-). Set the level so that the level meter reaches around (-12 dB) mark beneath the display window. If the sound is too high, lower the recording level until the level meter just barely reaches the (OVER) mark beneath the display window. Volume decreases < increases , Checking the remaining time or the recording position You can check the remaining time, track number, etc. when recording or during stop. On the recorder REC indicator REC + Jog lever -12 dB OVER Recording doesn't start in this step. If your source is an externally connected component, be sure to cue the source to the beginning of the material to be recorded before you start playback. 1 2 While the recorder is recording or stopped, press the jog lever, flip until "DISPLAY" flashes in the display, and then press the lever again. Flip the jog lever until the information you want flashes in the display. Each time you flip the lever, the display changes as follows. 6 Press X again to start recording. To stop recording, press x. The recording level control is switched back to automatic control when you record the next time. Display window on the recorder Notes • The recording level cannot be adjusted while recording is in progress. If you want to adjust the recording level after you have started the recording, press X to pause the recorder. Then do the procedure from step 5. • You cannot adjust the recording level manually during synchro-recording. A B C While recording A LapTime RecRemain Clock 1) Display B1) 1 2 3 order C2) 3 3 3 continued 19
![](/manual_guide/products/sony-mzr90-operating-instructions-e389e09/19.png)