Sony MZ-R91 Operating Instructions - Page 48

Error message NO COPY Meaning/Remedy • You tried to make a copy from a disc that is protected by the Serial Copy Management System. You cannot make copies from a digitally connected source which was itself recorded using digital connection. , Use analog connection instead (page 8). • You tried to play or record with no disc in the recorder. , Insert an MD. • The recorder could not detect digital input signals. , Make sure that the source is connected firmly (page 15). • You tried to record or edit on a premastered MD (P/B stands for "playback"). , Insert a recordable MD. • You tried to record or edit on a MD with the tab in the recordprotect position. , Slide the tab back (page 43). • You tried to erase the track mark at the beginning of the first track. • You tried to erase a track mark to combine tracks the recorder cannot combine (a track recorded in stereo and in mono, for example). • You tried to set DIGITAL MEGA BASS while the "AUDIO OUT" parameter was set to "LINE OUT". , Use the jog lever to set the "AUDIO OUT" parameter to "HeadPhone" (page 4, 13). • You tried to press X or T MARK during synchro-recording. • Heat has built up in the recorder. , Let the recorder cool down. • There is no more space for new data when you are editing the MD. , Erase unnecessary tracks (page 31). • You tried to record or edit on a track that is protected from erasing. , Record or edit on other tracks. • You pressed a key on the recorder while editing on the remote control. • You pressed a key on the remote control while selecting a menu on the recorder. • You pressed VOL +/- while the "AUDIO OUT" parameter was set to "LINE OUT." , Use the jog lever to set the "AUDIO OUT" parameter to "HeadPhone" (page 4, 13). • You tried to use the CD text copying function to copy a track or disc name from a CD that has no text data (page 23). NO DISC NO SIGNAL P/B ONLY PROTECTED SORRY TEMP OVER TR FULL TrPROTECT EDITING MENU LINE OUT NO TEXT 48