Sony MZ-R91 Operating Instructions - Page 4
Sony MZ-R91 Manual
View all Sony MZ-R91 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
This manual is for models MZR90 and MZ-R91. The MZ-R90 appears in the instructions for illustration purposes. Though they differ in appearance, the models share the same functions and are operated in the same way. For detailed specifications, see page 50. MZ-R90 About the i/LINE OUT jack on the recorder. The parameter ("AUDIO OUT") for the i/LINE OUT jack must be set to "HeadPhone" if you want to connect headphones other than the supplied set, or to "LINE OUT" if you want to connect another component to the recorder through a line cable. There is no need to make this when using the supplied headphones with remote control since it is done automatically. To set the "AUDIO OUT" parameter for the i/LINE OUT jack, do the following procedure: 1 Press the jog lever, flip until "AUDIO OUT" flashes in the display, and then press the lever again. 2 Flip the jog lever until "HeadPhone" or "LINE OUT" flashes in the display. 3 Press the jog lever when the item you want to select is flashing. MZ-R91 Notes • When the "AUDIO OUT" parameter is set to "LINE OUT", the VOL +/- buttons and the Mega Bass function become inoperative. To make them operative, set the "AUDIO OUT" parameter to "HeadPhone". • The "AUDIO OUT" parameter is automatically set to "HeadPhone" when you turn off the power. How to use the jog lever. Flip to select Push to enter The jog lever can be used to perform various operations during playback, recording, and editing, as well as when the recorder is stopped. Flip the jog lever to select an item in the display. Then press the jog lever to enter your selection. 4