Sony MZ-R91 Operating Instructions - Page 22

Setting the clock to stamp the recorded time To stamp the date and time on the MD when you record, you first need to set the clock. Once you set the clock, the recorder will include a time stamp each you record something. If you don't want to include a time stamp on the track, skip this operation. Jog lever X If you make a mistake while setting the clock Press x, and set the clock again from step 2. You can skip a step by pressing the jog lever. To display the current time When the recorder is not operating or while recording, press the jog lever, flip until "DISPLAY" appears in the display, and then press the lever again. Flip the jog lever until "CLOCK" flashes in the display, and then press the lever again. The current time appears in the display. To display the time in the 24hour system While setting the clock, press X. To display the time in the 12-hour system, press X again. Charging the built-in battery for the clock When you use the recorder for the first time or after a long period of disuse, charge the built-in battery. After setting the clock, leave the recorder connected to the AC power for about 2 hours to charge the built-in battery. Once charged, the built-in battery should last about a month without connecting to any of the power sources. The recorder will automatically charge the built-in battery while connected to AC power, dry battery or a rechargeable battery. x 1 2 3 Connect the power source. Use the supplied AC power adaptor. Press the jog lever while no disc is inserted or the recorder is stopped. Flip the jog lever until "CLOCK SET" flashes in the display, and then press the lever. The digits of the year flash. ¢¢y 1m 1d 4 5 Change the current year by flipping the jog lever, and then press the lever. The digit of the month flashes. Repeat step 4 to enter the current month, date, hour, and minute. When you press the jog lever to enter the minute, the clock starts operating. 22