Sony MZ-R91 Operating Instructions - Page 44
Sony MZ-R91 Manual
View all Sony MZ-R91 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Troubleshooting Should any problem persist after you have made these checks, consult your nearest Sony dealer. Symptom The recorder does not work or works poorly. Cause/Solution • Audio sources may not be securely connected. , Disconnect the audio sources once and connect them again (pages 8, 15). • The HOLD function is turned on ("HOLD" appears in the display when you press an operation button on the recorder). , Disable HOLD by sliding the HOLD switch in the opposite direction of the arrow (page 29). • Moisture has condensed inside the recorder. , Take the MD out and leave the recorder in a warm place for several hours until the moisture evaporates. • The rechargeable battery or dry battery is weak (r or "LOW BATT" flashes). , Charge the rechargeable battery or replace the dry battery (page 40). • The rechargeable battery or dry battery have been inserted incorrectly. , Insert the battery correctly (page 41). • You pressed a button while the disc indication was rotating quickly. , Wait until the indication rotates slowly. • When recording digitally from a portable CD player, you did not use AC power or did not disable the anti-skip function such as ESP (page 15). • The analog recording was made using a connecting cord with an attenuator. , Use a connecting cord without an attenuator (page 8). • The AC power adaptor was unplugged during recording or a power outage occurred. • While operating, the recorder received a mechanical shock, too much static, abnormal power voltage caused by lightning, etc. , Restart the operation as follows. 1 Disconnect all the power sources. 2 Leave the recorder for about 30 seconds. 3 Connect the power source. • The disc is damaged or does not contain proper recording or editing data. , Reinsert the disc. If this fails, rerecord. • The power sources have been disconnected during recording or editing, or the battery have been exhausted. , Set the power sources again, or replace the exhausted battery with new ones. The lid does not open. 44