Sony MZ-R91 Operating Instructions - Page 24

7 Press the jog lever. "TOC Edit" flashes. Afterwards, the disc name scrolls in the display. • The CD text copying function can only be used with CDs that support CD-TEXT. z If the disc or track name appears in the display in step 1, the music tracks and CD text information on some CDs are automatically recorded from start to finish. If the CD is this type, press x on the recorder at the point you want to stop recording, or after all tracks have been recorded. "TOC Edit" flashes. Afterwards, the disc name scrolls in the display. Notes • If you copy disc name information to a disc with a previously recorded disc name, the old disc name will be overwritten with the new one. • When the CD text copying function is on, various settings and editing functions cannot be accessed with the jog lever. • The RK-TXT1 CD text connecting cable is designed for exclusive use with this recorder and Sony portable CD player (D-EJ01). Do not use a connecting cable of another make to copy CD text information. • The remote becomes inoperative when the CD text connecting cable (RK-TXT1) is connected to the recorder. • Stopping or pausing playback on the CD player automatically causes recording on the recorder to pause. A new track mark is automatically added when you resume recording. • The track name of the track currently played will not be recorded if you stop or pause CD playback in the middle of the copying process on the recorder. z You can monitor the sound during recording. Connect the supplied headphones with remote control on to the CD text connecting cable and adjust the volume by pressing the VOL +/- buttons on the recorder. Connect the supplied headphones with remote control Notes • The CD text copying function can only be used with component (D-EJ01) with the logo shown below. 24