Sony MZ-R91 Operating Instructions - Page 36

Press/ Turn DISPLAY To Insert a blank space to type in a new letter by pressing within 2 seconds. Cancel labeling by pressing for 2 seconds or more. Delete a letter and move back all following letters to the left. 2 To label a track, press x. To label a disc, press the control towards . or towards N • > until " : Name" flashes in the display, then press x. The track or disc is ready to be labeled. Follow steps 4 to 6 of "Labeling a disc during stop" (page 35). 3 PLAYMODE To cancel labeling, press DISPLAY for 2 seconds or more. Note When the recording is stopped while labeling a track or a disc during recording, or when the recording moves on to the next track while labeling a track, the input at that point is entered automatically. 1) If phrases are stored in the phrase bank, the first phrase stored appears in the display(page 39). 5 6 Repeat step 4 and enter all characters of the label name. To cancel labeling, press DISPLAY for 2 seconds or more. Keep pressing the x for 2 seconds or more. The track or disc is labeled. Available characters • Capital and small letters of the English alphabet • Numbers 0 to 9 space) Labeling a track during playback 1 2 3 4 Insert a disc and play the track you want to label. Press DISPLAY for 2 seconds or more. " : Name" flashes in the display. Press x. The track is ready to be labeled. Follow steps 4 to 6 of "Labeling a disc during stop" (page 35). Relabeling recordings Follow the steps corresponding to the labeling method until the disc or track is ready to be labeled. Enter a new character over the one you want to change, then press the jog lever (keep pressing x for 2 seconds or more on the remote control). Notes • You cannot relabel premastered MDs or label MDs that have not been recorded. • The recorder is able to display, but cannot label using Japanese "Katakana" characters. • The recorder cannot rewrite a disc or track name of more than 200 letters that was created by another device. Labeling a track or a disc during recording 1 36 Press DISPLAY for 2 seconds or more during recording. " : Name" flashes in the display.